2 Ton® Epoxy Flow-Mix®
A clear, extremely strong, non-shrinking adhesive, specially formulated for moderate strength and water resistance. Apply mixed epoxy directly to your repair area. The Flow-Mix® nozzle automatically mixes the hardener and resin together.
- FEATURES
- TIPS & TRICKS
- Bonds: Acrylic, China, Fiberglass, Metal, Wood, Concrete, Ceramic, Glass
- Tensile Strength: 2500 psi
- Color: Clear to light yellow
- Water resistant
- Handling Time: 30 Minutes
- Set Time: 30 Minutes
- Full Cure: 24 Hours
- Temperature Range: -60°F to 180°F
- Part No.: 23145
- Package: 0.47 oz. (14ml) syringe, carded
- Units Per Case: 6
- Pull plunger back slightly (1/8”) to allow air bubbles to rise to top so that you do not push air bubbles into the Flow-Mix® nozzle.
- To get an even flow of resin and hardener, push down evenly on the plunger. Note; equal portions of the hardener and resin must be thoroughly mix in order for this product to cure properly.
- Use painters or masking tape to protect any areas from unwanted epoxy exposure. Remove tape before the epoxy cures.