Flow-Mix® Cold Weld Epoxy

Bookmark and Share

Flow-Mix® Cold Weld Epoxy is a high strength, two-part epoxy that is automatically mixed during application with the self-mixing applicator tip.  Works well on almost all metals.  Easy cleanup and easy to use. 

  • Bonds: Metal, Steel, Aluminum, Bronze, Iron, Copper
  • Tensile Strength:  1500 psi
  • Color:  Dark Gray
  • Water Resistant
  • Handling Time:  4-5 Minutes
  • Set Time:  8-10 Minutes
  • Cure Time:  1 Hour
  • Temperature Range:  40°F to 200°F
  • Part No.:  46229
  • Package:  0.47 oz. (14ml) syringe, carded
  • Units Per Case:  6
  • Pull plunger back slightly (1/8”) to allow air bubbles to rise to top so that you do not push air bubbles into the Flow-Mix® nozzle.
  • To get an even flow of resin and hardener, push down evenly on the plunger.
    Note, equal portions of the hardener and resin must be thoroughly mixed together in order for this product to cure properly. 
  • Removable tape is good for putting on an area that you do not want epoxy to get on.  Before the epoxy cures, remove the tape.
  • If you use both nozzles and there is epoxy remaining, you can hand mix. 

also available
in the following packaging