Battery Terminals

Bookmark and Share

Battery posts will last longer and keep corrosion from forming by cleaning and then applying a thin layer of VersaChem® No Corrode Battery Gel before making the connection.

Step-by-Step Directions

  1. Remove battery cables from battery terminals by removing the negative terminal first.
  2. Secure the loose cables to avoid accidental contact with the terminals.
  3. Clean terminal posts and cable clamps with baking soda or a battery terminal cleaner.
  4. Dry with a disposable, lint-free rag.
  5. Apply No Corrode Battery Gel on the battery posts, battery cables and clamps.
  6. Replace the positive cable first and the replace the negative cable and tighten.