Broken or Cracked Tail light

Bookmark and Share

For cracked, broken or chipped tail light lenses, save the cost of a replacement by using VersaChem® Plastic Lens Repair Kit. These easy to apply panels come in three D.O.T. approved colors - clear, red and amber.  The heavy-duty adhesive backing will provide a strong weatherproof seal.

Step-by-Step Directions

  1. Wear gloves.  Remove all loose pieces of tail light from damaged area.
  2. Clean surrounding area of the lens with the alcohol pad. Dry thoroughly.
  3. Measure repair area adding ½” to each measurement to ensure a proper seal.
  4. Cut repair panel to size using a utility knife or shears.
  5. Before removing the backing, check that the cut piece provides adequate coverage over the damaged area.
  6. If the repair panel is to be placed over a curved area, roll the panel and hold for several minutes before applying.
  7. Peel backing off of repair panel and center over area to be repaired.
  8. Press firmly around edges, bending material to fit contour of lens.
  9. Make sure there is a tight fit around the entire perimeter of the repair area to prevent any moisture from entering lamp.