4 Minute Steel Epoxy

Bookmark and Share

4 Minute Steel Epoxy is a fast-setting, industrial strength epoxy that is excellent for bonding metal to metal or repairing defects in metal, wood and masonry.  Hardens to a steel-like mass that can be drilled, tapped, sanded, filed or painted once fully cured.   

  • FEATURES
  • TIPS & TRICKS
  • Bonds: Aluminum, Steel, Brass, Bronze, Metal 
  • Tensile Strength:  3000 psi
  • Color:  Gray
  • Water Resistant
  • Handling Time:  4 Minutes
  • Set Time:  10 Minutes
  • Cure Time:  24 Hours
  • Temperature Range:  221˚F (continuous) -300˚F (intermittent)
  • Non-Flammable
  • Chemical Resistant: Most automotive fluids 
  • Part No.: 44209
  • Package:  2 oz. (56.7g) tubes, carded
  •  Units Per Case:  12
  • Equal portions of the hardener and resin must be thoroughly mixed together in order for this product to cure properly.
  • Only mix the amount of hardener and resin that can be used within the handling time.
  • Removable tape is good for putting on areas that you do not want epoxy to get on.  Before the epoxy cures, remove the tape.