Flow-Mix® Cold Weld Epoxy

Bookmark and Share

An easy alternative to welding and soldering.  Can be drilled, tapped, machined, filed, sanded and painted when fully cured.

  • Bonds:  Steel, Copper, Aluminum, Bronze, Metal, Iron 
  • Tensile Strength:  1500 psi
  • Color:  Dark Gray
  • Water Resistant
  • Handling Time:  4-5 Minutes
  • Set Time:  8-10 Minutes
  • Cure Time:  1 Hour
  • Temperature Range:  40°F to 200°F 
  • Part No.:  24445
  • Package:  0.47 oz. (14ml) syringe, carded
  • Units Per Case:  6
  • Pull plunger back slightly (1/8”) to allow air bubbles to rise to top so that you do not push air bubbles into the Flow-Mix® nozzle.
  • To get an even flow of resin and hardener, push down evenly on the plunger.  Note; equal portions of the hardener and resin must be thoroughly mix in order for this product to cure properly. 
  • Removable tape is good for putting on an area that you do not want epoxy to get on.  Before the epoxy cures, remove the tape.
  • If you use both nozzles and there is epoxy remaining, you can hand mix.

also available
in the following packaging

Flow-Mix® Cold Weld Epoxy
Size: 0.47 fl. oz. (14ml) syringe