H2 Hold® All-Purpose Epoxy

Bookmark and Share

H2 Hold® is a flexible, toughened, non-corrosive structural adhesive that is specially formulated for both wet or dry bonding.  Sticks and cures underwater.  Shock and vibration resistant. 

  • Bonds: PVC, Fiberglass, Wood, Metal, Acrylic, Fabric, Ceramic, Masonry, Plastic, Glass 
  • Tensile Strength:  1800 psi
  • Color:  Off-White
  • Waterproof
  • Flexible
  • Cures and bonds underwater
  • Handling Time:  15-30 Minutes
  • Set Time:  1-2 Hours
  • Cure Time:  24 Hours
  • Temperature Range:  40°F to 200°F
  • Part No.:  22429
  • Package:  0.84 fl. oz. (25ml) syringe, carded
  • Units Per Case:  12
  • Mix two-part epoxy above water per directions before applying underwater.
  • If sanding, for best results, wait three days curing time at 70˚F before sanding.
  • Only mix the amount of resin and hardener together that can be used within the handling time.
  • Not recommended for use on polyethylene or polypropylene plastics.