Plastic Welder™ Flow-Mix®, 14 ml

Bookmark and Share

Plastic Welder™ is a strong structural adhesive formulated for bonding dissimilar materials and unprepared metals.  Non-sagging formula.  Minimal surface preparation required.  Once cured, the bond is resistant to weathering, humidity and wide temperature variations.   

  • Bonds: Hard plastics, metal, concrete, glass, ceramic, china, acrylic, ABS, vinyl, fiberglass, wood, styrene, corian 
  • Tensile Strength:  3500 psi
  • Color:  Cream
  • Waterproof
  • Handling Time:  4-5 Minutes
  • Set Time:  10-15 Minutes
  • Cure Time:  24 Hours
  • Temperature Range:  -40°F to 200°F
  • Part No.:  47829
  • Package:  0.47 fl. oz. (14ml) syringe, carded
  • Units Per Case:  6 
  • DO NOT FREEZE; store between 55°F and 75°F
  • Pull plunger back slightly (1/8”) to allow air bubbles to rise to top so that you do not push air bubbles into the Flow-Mix® nozzle.
  • Does not bond to Polyethylene or Polypropylene Plastics.

also available
in the following packaging

Plastic Welder™, 25 ml
Size: 0.84 fl. oz. (25ml) syringe